Inflatable Air Lifting Bags High-Pressure Marine Rubber Air Bag For
Shipyard
Ship launching airbags, also known as roller bags, launching air
balloons, inflatable marine airbags, air lift bags, and salvage
bags, are specialized marine rubber air bags used for launching
marine vessels, ship landing, or haul-outs. These marine rubber
airbags are also widely used in loading, floating, lifting, moving
sunken ships, and salvaging stranded boats. Constructed with
heavy-duty synthetic-tire-cord layers and inner/outer rubber layers
in a long cylindrical balloon shape.
Ship launching or upgrading using marine airbags represents
innovative ship-launching technology that overcomes the limitations
of traditional "end-on launching", "side ship launching", and
"float-out" methods. This flexible technology eliminates
restrictions of fixed launching tracks and is increasingly adopted
by shipyards worldwide due to its advantages in time savings, cost
efficiency, flexibility, and safety.
Our engineering team continuously innovates in design, material
usage, and manufacturing technologies to ensure maximum
flexibility, safety, and reliability. To date, our ship-launching
rubber airbags have successfully launched cargo vessels, barges,
chemical tankers, tugboats, AHTS vessels, floating docks, and
construction caissons up to 100,000DWT.
All Doowin Marine ship launching airbags are manufactured and
tested to fully comply with
ISO 14409:2011 (Ships and marine technology -- Ship launching airbags) and
ISO 17682:2013 (Methodology for ship launching utilizing air bags).
Ship Launching Airbags Material
Our rubber airbags are constructed with an outer rubber layer,
multiple synthetic-tire-cord layers, and an inner rubber layer
vulcanized firmly together, with additional layers applied at the
end shoulders for enhanced durability.
Inner and Outer Rubber
Both inner and outer rubber layers undergo rigorous testing to meet
international standards. The outer rubber layer protects cord
layers from abrasion and external forces, featuring compounds with
exceptional tensile and tear strength to withstand harsh weather
conditions and demanding usage.
Ship Launching Airbags Rubber Material Performance
| No. | Test Item | Value | Standard |
|---|
| 1 | Tensile Strength, Mpa | ≥18 | ISO 37 |
| 2 | Elongation at break, % | ≥400 | ISO 37 |
| 3 | Hardness, ° (Shore A) | 60±10 | ISO 7619-1 |
| 4 | Tear Strength, N/cm | ≥400 | ISO 34-1 |
| 5 | Compression set, % (70℃±1℃,22h) | ≤30 | ISO 815-1 |
| 6* | Holding of pull lengthening, % | ≥80 | ISO 188 |
| 7* | Holding of elongation at break, % | ≥80 | ISO 188 |
| 8* | Change of hardness, ° (Shore A) | ≤8 | ISO 7619-1 |
| 9 | Static ozone aging at 40℃ x 96h, extension 20% | No crack | ISO 1431-1 |
Ship Launching Airbags PerformanceType No. | Diameter (m) | Initial Internal Pressure for Test (kPa) | Rated Working Pressure (kPa) | Bearing Capacity at 70% compress deformation (KN/m) | Minimum Burst Pressure (kPa) |
QP5 | 0.8 | 48 | 210 | 184 | 630 |
| 1.0 | 35 | 170 | 186 | 510 |
| 1.2 | 28 | 140 | 185 | 420 |
| 1.5 | 20 | 110 | 181 | 330 |
| 1.8 | 16 | 90 | 178 | 270 |
| 2.0 | 14 | 80 | 176 | 240 |
QG6 | 0.8 | 56 | 245 | 215 | 740 |
| 1.0 | 45 | 200 | 219 | 600 |
| 1.2 | 32 | 165 | 217 | 490 |
| 1.5 | 25 | 130 | 218 | 390 |
| 1.8 | 20 | 110 | 220 | 330 |
| 2.0 | 18 | 100 | 220 | 300 |
QG7 | 0.8 | 64 | 270 | 237 | 810 |
| 1.0 | 50 | 220 | 242 | 660 |
| 1.2 | 38 | 190 | 251 | 570 |
| 1.5 | 29 | 150 | 247 | 450 |
| 1.8 | 25 | 130 | 257 | 390 |
| 2.0 | 23 | 120 | 264 | 360 |
QG8 | 0.8 | 70 | 300 | 264 | 900 |
| 1.0 | 54 | 240 | 264 | 720 |
| 1.2 | 45 | 210 | 277 | 630 |
| 1.5 | 32 | 170 | 280 | 510 |
| 1.8 | 29 | 150 | 297 | 450 |
| 2.0 | 26 | 140 | 308 | 420 |
